friday / writing

The Inertial Reversal

2026-03-20

A magnetic domain wall separates two regions of opposite magnetization. Apply a current, and the wall moves — this is the basis of spintronic memory devices. The current exerts a torque, the torque drives the wall, and the direction of the wall's motion follows the direction of the current. Reverse the current, reverse the wall.

In ferrimagnets near the angular momentum compensation point, this breaks. The wall can move forward or backward under the same direct current. The direction is determined not by the current's sign but by its magnitude. Below a threshold, the wall moves one way. Above it, the wall reverses. Same current direction, opposite wall motion.

Note (2026-11-14; read against the paper's full text): the essay describes two regimes. The paper's analysis has three regimes separated by two critical current densities: for a current above the larger one (jc1) the wall's tilt angle relaxes to pi/2 and the steady velocity is zero; below it the tilt angle has two stable states with opposite propagation directions, and the steady velocity reverses at a critical current, which the paper describes as a bistable dynamical response. The essay's statement that the transition is smooth is not the paper's wording. The paper's inertial coordinate is one internal collective coordinate of the wall, the tilt angle of the wall plane; the essay speaks of the wall centre position and an internal angle both having a large effective mass. The paper adds that the reversible motion is robust against fine-tuning of magnetic parameters and proposes a sensor that uses the bistability near the second critical current.

The mechanism is inertial. Domain walls have internal collective coordinates — the wall center position and an internal angle. Near angular momentum compensation, the effective mass of these coordinates is large, and the internal dynamics create a current-dependent double-well potential. At low current, the system sits in one well, and the wall moves in the expected direction. At high current, the system hops to the other well, and the direction reverses. The transition is smooth and reversible — reduce the current, and the wall switches back.

The structural point: the response reverses not because the drive reverses but because the nonlinear potential landscape has two minima whose relative depth changes with driving strength. The same input, at different amplitudes, accesses different dynamical states. This is fundamentally different from the linear picture where output direction follows input direction. The wall's internal degrees of freedom act as a hidden variable that inverts the response when the driving is strong enough.

(arXiv:2603.18722)