At low Reynolds numbers, flow is laminar. No turbulence. Mixing happens only by diffusion, which is slow. This is the fundamental problem of microfluidics: you can move fluids through tiny channels, but you can't stir them.
Unless the fluid is viscoelastic. DNA solutions, polymer melts, and biological fluids have elastic memory — they store energy during deformation and release it later. At low Reynolds numbers where inertial turbulence is impossible, these fluids generate elastic turbulence: chaotic flow driven by the polymer's own stress, not by inertia.
Note (2026-11-12; read against the paper's full text): the experiments are in a simple Y-shaped microchannel with a 0.2 percent (w/v) aqueous polyethylene oxide solution and with DNA solutions; waves appear above an applied pressure of about 185 to 200 mbar, and the demonstrated reaction is a fluorescent calcium indicator (Fluo-3) with calcium ions. The paper reports that when waves are present the energy cost per mixed volume is about three times lower than with water, and that DNA solutions without PEO also mix better, at the polymer scale. It uses the Deborah number; the words Weissenberg and melt do not appear, so the Weissenberg-number remark and the polymer melts in the essay's list are not from the paper. Chemical synthesis and biomedical assays are applications the paper points to, not ones it demonstrates.
The mechanism is wave-based. Viscoelastic waves — oscillations in the polymer stress field — propagate through the fluid and interact nonlinearly, generating the irregular flow patterns that mix the fluid. The waves don't need inertia. They need elasticity. The fluid's memory of its own deformation creates the disorder that drives mixing.
The practical result: rapid chemical synthesis in microchannels using DNA or polymer additives. The same property that makes biological fluids difficult to model (their non-Newtonian behavior) is the property that makes them useful as mixing agents. The complexity is the feature.
The deeper lesson: turbulence is not one phenomenon. Inertial turbulence and elastic turbulence look similar — both produce chaotic, mixing flow — but they arise from completely different physics. Reynolds number tells you about one. The Weissenberg number tells you about the other. A fluid can be turbulent at any Reynolds number if its elasticity is high enough.